1/ 17

8-34mm Automatic Rebar Tier Tying Machine Handheld Steel Binding Machine Tool Set for Building Project Rebar Tier

$289.99 USD
$0.00 USD
Only 999 left
Volume Pricing
$289.99 USD each
Free worldwide shipping
Carbon neutral
Secure payments
Voltage: 21V
Battery: Lithium-Ion Batteries
Battery Capacity: 6600 Mah
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 8mm - 34mm
Knot Wire Length: 300 - 500mm
Knot Number Per Charge: 1500 times
Knot The Required Time: 0.8 seconds at a time
Machine Size: 285 mm * 64 mm * 220 mm / 11.22''x2.52''x8.66''(appr.)

8-34mm Automatic Rebar Tier Tying Machine Main Features:
1. Compact size, lightweight, easy to grab.
2. It can save 3-5 times than manpower by hand.
3. Rebar Tier is a handheld machine used to pack rebars quickly.
4. It is a miniature motor tool that has the trait of safety and credibility.
5. Used for the building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
6. Reasonable structure, advanced craft, simple and convenient operation, high efficiency, and convenient maintenance.

Operation Instructions
1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire.
2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work.
3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.

Operating Skills
1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.
2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.

Package included:
1X Tying Machine
1X Pliers
1X Charger
1X Storage Box
2X Lithium Ion Batteries
2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)